Line/Loc® Complete Roll Control System by Hurst
Designed with simplicity and ease-of-install in mind, Hurst’s complete Line/Loc kits use the absolute best-quality, prebent, double-walled stainless steel brake lines. In many cases, these hard-lines are superior to OEM quality. Hurst engineers realized when developing these kits that less really is more. Fewer connection points means fewer places where the system can leak and shorter lines mean less time bleeding the system. These kits are direct bolt-in meaning no measuring, no cutting, and no pre-bending; just simple, clean, factory-looking installs right out of the box. This is used primarily in drag racing to provide positive locking action to the front wheels of race cars, reducing the chance of “Rolling the Lights” and producing more effective burnouts for heating up the tires. Rigorous testing has proved a 1/100,000 of a second release time and vibration tests have seen up to 30 Gs applied without mechanical failure. Adaptable to most domestic and import hydraulic brake systems. CAUTION: Hurst Line/Loc Should not be used as an emergency brake, or any application requiring the solenoid to be activated for a long period of time.
B&M Launch Control
B&M Launch Controls are intended primarily as a brake-locking device for drag racing, but they also can be used on the street as a hill-holder for a maximum of up to 60 seconds. These high quality solenoids can be used on either the front or rear brakes of your vehicle and can handle pressure spikes up to 1500 PSI or maintain constant pressure of up to 400 PSI.
The choice for performance & dependability
Controls the front or rear brakes
For street & racing applications
For use with manual or automatic transmission
Works with 12 & 16 volt systems
Use it as a brake locking device for drag racing or as a hill holding device for street
Items 1 - 17 of 17
Items 1 - 17 of 17
Back To Top